Showing posts with label House model. Show all posts
Showing posts with label House model. Show all posts

Friday, October 21, 2011

A Flash of Light

After working much of yesterday on the roof and loft level I was just overtaken by the absolutely incredible view from this height.  It was a glorious day.

Last night as I slept I found myself in my sub-consious working on a way to make a dormer for the loft.  First I tried an A-frame type dormer, like we have in our current living room, but there is not enough height to give us much benefit.   So I then tried a flat top dormer.

My original plan treated the loft primarily as a storage area... hence no windows on the side facing the view.  It is now or never if we want to do anything about this.  For the last few weeks I had brushed off my wife's constant ooooo's and aaaah's about the view, telling her we could put in a few opening skylights that fit between the roof joists.

Then as I was waking up I mulled over a couple of different ideas as to how I might do it better.  Today we planned to build the walls and next week set the roof josits in place... so I quickly pulled out the model and started to cut out cardboard to make a dormer.

This shows a nearly flat top dormer... roof slope falls about a foot over 18 feet.

This shows a dormer that would be about 10 feet wide.

I think I can make it work with the TGI's I have on hand... I may have to use some 2x12's on top of the side walls... and get 2x12's for the eaves.

I have posted these photos so that my TGI engineer and structural engineer can look at this idea and tell me the best way to proceed from here.

Monday, July 11, 2011

Excavating for the New Addition

After completing most of the excavations I set up the model in the driveway between the house and the garage and took this shot with the real trees in the background.

It is going to take quite a bit of work to complete this project, but we will just do what we can every day until we see it thru.  Here you can see where I have cut the pavement and started excavating.

I have numbered this plan to show each individual excavation.  Each one is unique.  Number 1 is located inside the existing garage and required cutting the concrete slab so that I could dig down to bedrock.  Number 2 is outside the garage and inside gravel path contained by a rock retaining wall.  Numbers 3 and 4 are in the middle of the driveway and must carry about 35,000 pounds.  Number 5 will be a closet extension for the master bedroom.  Number 6 is for the stairway to the second level... and Number 7 is for a pantry which will be accessed off the laundry room.

The garage floor concrete was cut 28" by 36" and we found some huge boulders that are very tight and immoveable.  I may still have to try to widen where possible before drilling into these rocks and pining them together with rebar.

Here is another angle on Number 1 taken from the other side.

Number 2 has been excavated 4 feet wide and is 54 inches between the garage and the rock wall... about 36 inches deep... and I expect to see a 12 inch thick footing 42"  by more than 60"... the full distance from under the slab to under the rock retaining wall.

The garage is a slab on grade with no footing or foundation... so I have dug under the slab 8 inches so that I can drill into the slab to tie in rebar to the new foundation and footing.  The centre of the post is 36 inches off the garage wall.  The black 3/4" poly pipe is water supply for irrigation.  The yellow level is 48 inches long.

t
Both Numer 3 and 4 were cut 36 inches square.  This was the tightest material of all the excavations... hence I stopped going deeper at 22 inches.

 It took me 90 minutes just widen the base three inches to 42 inches square to receive a 12 inch high footing... that is how tightly packed this gravel is.

This hole was much easier to dig as it was full of many rocks, which I separated out and saved for future rock facing, which I plan to do on the posts supported by this footing an foundation.

This base is undercut to receive a 48" square by 12" thick footing... and the bottom is 28 inches below the pavement.

I took this  photo to show not only the amount of rock, but the size... the largest ones are already loaded into the tractor bucket.  A few of these rocks came from the hole Number 2 by the garage... but one day many of these rocks will graduate to a place of honour in rock facing on these posts or the house.

Number 5 is the master bedroom closet expansion... and it all is down to bedrock.  Only where the service pipes are laying on the bedrock will I cover with sand and soil so the concrete will not touch them.  Minimal footings here will be used to level up the base so that a standard 24-inch plywood form can be used.

Knowing there were electrical, phone and water service lines in this area, I choose to dig most all of this area by hand... it took most of two days.

Under the stairs we plan to set up our recycle department... which will be on a concrete slab on grade.  But next to the house at each end of the stairs that go up we will need support for posts that will carry a double truss joist the will support the outside wall and roof joists.

There still is some excavation to complete here, regardless of if I do slab on grade or floor joists.  From the steps to the left there is a cantilever... so to contain the planter next to the house bricks were stacked under the outside wall.  The planter footing 24 inches away from the house will be removed if this is going to be crawl space... which it likely will be.

As the sun was setting we look back from the future pantry towards the garage.

From the pantry side we look at the model again.


Saturday, April 9, 2011

Making Models of Our New Addition


The last few weeks before we both left for a little holiday I have been pushing to complete a model of what our next renovations will look like.  We are planning to build a carport to connect our house and garage... and put a studio 22 x 36 feet above.

We want to be sure that this "addition" will tie into the existing residence and garage and not look like an "add on" but rather give the impression that this was the way it was designed to be from the very beginning.

I just recycled old cardboard bankers boxes... we had plenty of these left over from our Acorn Homes days... so I selected some white boxes for this purpose.  They were white on one side and the normal brown cardboard colour on the other side.  The brown cardboard in this photo is the 1/4 inch scale footprint of our existing house around which I will attach the walls.  With a black marker I outline and darken the windows.

I discovered that using a charcoal stick on the corrugated cardboard I could very quickly achieve the effect of the vertical channel cedar siding on our house.  Here I am colouring the last section of walls to be attached to the floor plan in the foreground.

Once all the walls were in place I cut out the roof pieces and attached them.

Before gluing the model of the house to a base I shot the levels of our existing house and garage.  The garage slab is 24 inches below the main floor of the house... so that meant I needed to raise the house 1/2 inch before attaching it to the base so the model would reflect the true elevations... hence the 1/2 inch cedar foundation you see here.

Here the house and garage are now positioned at the right distance apart and at the correct height in relation to each other, ready to receive the model of the new addition.

But first I must make the new pantry, the stairs to go up to the new studio and a generator room.  Later we learned that we could not have a gas generator attached to a residence, so we had to delete this room or use it for something else... like maybe a larger closet for our master bedroom.

This is Plan A... the first effort to show what I thought was the best solution for the studio and loft over the carport.  My primary negative reaction to this plan was the high vertical ends on the studio walls.  This plan had a loft over the right end of the studio with stairs to loft that followed over the first flight of stairs.  I did not like the feeling of entering the studio with a 7-foot ceiling for the first 12 feet or so. The lower ceiling was because of the loft over which came up to the large window seat dormer.

To overcome the feeling that this studio/carport was an add-on I thought it might help to extend the studio over the top of the garage about 6-feet...

And I really liked the way this idea worked out.  I also came up with another way to tie the roof over the new master bedroom closet (which I show with stone facing).  This became Plan B.

As much as both Shirley liked this plan in general, I told Shirley that I would still make another model with the roof following the same angle as the main house, instead of at right angles as Plan A and B are.

With the post and beams for the carport in place, it is pretty easy to interchange the different modules.

 So here is Plan C.  We really liked the feeling of the way the roof lines complimented the original house.  This plan has a great feeling as you come up the stairs and enter the studio... you see the high vaulted ceiling immediately and the loft is across the back half of the studio, opposite the big studio front windows.

Major disadvantages of this design are that it does not have any clerestory windows, so doesn't tie in as well to the original house.  The symmetry of the roof forces me to move the the support posts closer to the existing garage so that they can carry the central beam at the top of the roof... and that makes access to the left side of the carport more restricted... likely too tight to get our F-350 truck in and out.

So, it looks like we will still have to make another model and try to correct the deficiencies.

This is Plan D... the drumroll please.  I tired to correct all of the deficiencies of all the other plans.  It has clearstory windows protected from the brightest sun (north facing windows.)  It is a good marriage to the existing house... the roof lines are a continuation of the main house roof line.  The studio overlaps the garage 6-feet.  I will be able to lift the studio roof enough to take that notch out where it intersects with the garage.  One of the nicest things is the great feeling upon entry to the studio... where you will immediately see the total vaulted ceiling upon stepping into the studio, since the loft is primarily to the rear of the studio, with a small section of loft over the stirs and bathroom... making an L-shaped loft.  Access to the loft will be with a library ladder that will be moveable as required where needed... so that will save the area previously needed for stairs.

This is the other side of the studio addition.  We plan to have a door onto a small deck, which is really the roof of the new pantry.  The circle near the peak is a 3-foot bubble window in the loft.  We think the grandkids will love it.

With the roof removed you can see the sleeping loft, which is basically 10 x 10 with a height of from about 6 to 9 feet high and have adequate handrails.   It will be separated from the storage part of the loft which is over the stairs and bathroom.

Here you can see the stairs coming up from our front entry steps.  The bathroom is immediately to the left, over our new master bedroom closet.

The bottom line is that both Shirley and I are really pleased about the way this plan feels and works.

Our last day before leaving on our trip away from our island I had a meeting with the building inspector on site to get an understanding of the requirements here to get a building permit.  Later in the day I had a two hour meeting with our local roofer and he educated us in the pros and cons and costs of several possible options.  We plan to redo our entire house and garage with the same product we pick for the new addition.

Building something new is always exciting... and this summer things will be very exciting for us on Mayne Island.

"The doors we open and close each day decide the lives we live." -Flora Whittemore